1. A breve aggiorneremo la piattaforma di Reboot per risolvere alcuni problemi con i plug-in, quindi chiediamo ancora un po' di pazienza, Lo staff di Reboot

Nuovo FW 9.1.0 nuovi CFW :)

Discussione in 'News Switch' iniziata da student, 8 Dic 2019.

  1. student

    student Staff Livello 43 Staff

    Iscritto:
    30 Ago 2015
    Messaggi:
    4.336
    Like ricevuti:
    4.408
    [​IMG]
    Questa volta all'apparenza in anticipo rispetto ad Atmosphere il team xecuter rilascia SX OS v2.9.3 con supporto al nuovo firmware 9.1.0 (che è diverso dal vecchio 9.0.1 :wink: ); Atmosphere tallona con la pre-release 0.10.0.


    NOTA
    Se utilizzate SX Autoloader 1.20 il CFW firmware 9.1.0 andrà in crash restituendo l'errore
    2168-0002 QUINDI dovete cancellare/rinominare la cartella SD:\sxos\titles\00FF0012656180FF (che contiene appunto SX Autoloader) per farlo avviare.
    Si attendono updates di questo cmodo tool.



    CHANGELOG SX OS:
    • Compatibility with firmware 9.1.0
      A few days ago, firmware 9.1.0 was released. While this is a minor update in terms of new functionality, we want to make sure that everyone who updated their console (or emuNAND) to 9.1.0 can still enjoy SX OS.
    • Compatibility with game titles that use newer encryption
      Some (very) recent games would display as white boxes in the menu and/or could not be installed. This has been resolved. Enjoy the full compatibility!
    Aggiungendo a margine la notizia che l'attesa del nuovo SX OS per le consoles attualmente patched/lite non deluderà le aspettativa senza specificare la data del rilascio.



    CHANGELOG ATMOSPHERE:
    fusee-primary was last updated in: 0.10.0.

    With thanks to the @switchbrew team, Atmosphère 0.10.0 is bundled with hbl 2.2, and hbmenu 3.1.1.

    • Please note: Atmosphère 0.10.0 is currently in pre-release.
      • If any bugs are reported while Atmosphère is in pre-release, they will be fixed and the build will be updated.
      • 0.10.0 will transition to release after a short amount of time has passed without pressing bug reports.
    The following was changed since the last release:

    • Support was added for 9.1.0
      • Please note: The temporary hid-mitm added in Atmosphere 0.9.x will be removed in Atmosphere 0.10.1.
        • Please ensure your homebrew is updated.
    • The Stratosphere rewrite was completed.
      • libstratosphere was rewritten as part of Stratosphere's refactor.
        • Code responsible for providing and managing IPC services was greatly improved.
          • The new code is significantly more accurate (it is bug-for-bug compatible with Nintendo's code), and significantly faster.
      • ams.mitm was rewritten as part of Stratosphere's refactor.
        • Saves redirected to the SD card are now separated for sysmmc vs emummc.
        • Please note: If you find any bugs, please report them so they can be fixed.
    • Thanks to the rewrite, Atmosphere now uses significantly less memory.
      • Roughly 10 additional megabytes are now available for custom system modules to use.
      • This means you can potentially run more custom system modules simultaneously.
        • If system modules are incompatible, please ask their authors to reduce their memory footprints.
    • Atmosphere's configuration layout has had major changes.
      • Configuration now lives inside /atmosphere/config/.
      • Atmosphere code now knows what default values should be, and includes them in code.
        • It is no longer an error if configuration inis are not present.
      • Correspondingly, Atmosphere no longer distributes default configuration inis.
        • Templates are provided in /atmosphere/config_templates.
      • loader.ini was renamed to override_config.ini.
      • This fixes the longstanding problem that atmosphere updates overwrote user configuration when extracted.
    • Atmosphere's process override layout was changed.
      • Atmosphere now uses the /atmosphere/contents directory, instead of /atmosphere/titles.
        • This goes along with a refactoring to remove all reference to "title id" from code, as Nintendo does not use the term.
      • To make this transition easier, a temporary functionality has been added that migrates folders to the new directory.
        • When booting into 0.10.0, Atmosphere will rename /atmosphere/titles/<program id> to /atmosphere/contents/<program id>.
          • This functionality may or may not be removed in some future update.
        • This should solve any transition difficulties for the typical user.
        • Please make sure that any future mods you install extract to the correct directory.
    • Support for configuring override keys for hbl was improved.
      • The key used to override applications versus a specific program can now be different.
        • The key to override a specific program can be managed via override_key.
        • The key to override any app can be managed via override_any_app_key.
      • Default override behavior was changed.
        • By default, atmosphere will now override the album applet with hbl unless R is held.
        • By default, atmosphere will now override any application with hbl only if R is held.
    • The default amount of applet memory reserved has been slightly increased.
      • This allows the profile selector applet to work by default in applet mode.
    • The way process override status is captured was changed.
      • Process override keys are now captured exactly once, when the process is created.
        • This fixes the longstanding issue where letting go of the override button partway into the process launch could cause problems.
      • The Mitm API was changed to pass around override status.
        • Mitm services now know what keys were held when the client was created, as well as whether the client is HBL/should override contents.
      • An extension was added to pm:info to allow querying a process's override status.
    • Thanks to process override capture improvements, hbl html behavior has been greatly improved.
      • Web applets launched by hbl will now always see the /atmosphere/hbl_html filesystem
    • Support was added to exosphere for enabling usermode access to the PMU registers.
      • This can be controlled via exosphere!enable_user_pmu_access in BCT.ini.
    • An enormous number of minor bugs were fixed.
      • dmnt's cheat VM had a fix for an inversion in opcode behavior.
      • An issue was fixed in fs.mitm's management of domain object IDs that could lead to system corruption in rare cases.
      • The Mitm API no longer silently fails when attempting to handle commands passing C descriptors.
        • On previous atmosphere versions, certain commands to FS would silently fail due to this...
          • No users reported any visible errors, but it was definitely a problem behind the scenes.
        • These commands are now handled correctly.
      • Atmosphere can now display a fatal error screen significantly earlier in the boot process, if things go wrong early on.
      • The temporary hid mitm will no longer sometimes cause games to fail to detect input.
      • Mitm Domain object ID management no longer desynchronizes from the host process.
      • An issue was fixed that could cause service acquisition to hang forever if certain sm commands were called in a precise order.
      • An off-by-one was fixed that could cause memory corruption in server memory management.
      • … and too many more bugs fixed to reasonably list them all :smile:
    • General system stability improvements to enhance the user's experience.
     
    #1
    Ultima modifica: 10 Dic 2019
    A dante78, mimmoole, mikifantastik98 e 5 altri utenti piace questo elemento.
  2. Preacher

    Preacher Livello 4

    Iscritto:
    21 Mar 2018
    Messaggi:
    62
    Like ricevuti:
    11
    Dopo aver aggiornato da 2.9.2 a questo nuovo 2.9.3 beta la cosole va in errore 2618-0002 :rage:. Ora sono costretto a formattare la microSd...
     
    #2
  3. mimmoole

    mimmoole Livello 21

    Iscritto:
    2 Lug 2018
    Messaggi:
    1.157
    Like ricevuti:
    250
    devi eliminare sx autoloader
     
    #3
  4. turi94

    turi94 Livello 6

    Iscritto:
    14 Apr 2016
    Messaggi:
    134
    Like ricevuti:
    19
    Qualcuno ha provato il nuovo sx os 2.9.3 con il firmware 9.1.0 su emunand? Prima che succedano cose strana come l'ultima volta
     
    #4
  5. ulaula

    ulaula Livello 13

    Iscritto:
    5 Gen 2016
    Messaggi:
    480
    Like ricevuti:
    213
    Funziona tutto tranquillo
     
    #5
    A turi94 piace questo elemento.
  6. turi94

    turi94 Livello 6

    Iscritto:
    14 Apr 2016
    Messaggi:
    134
    Like ricevuti:
    19
    Hai aggiornato con Choixdujour? Metto prima l'ultima beta di sx os o prima aggiorno? L'ultima volta è successo un casino...
     
    #6
  7. DarkSora91

    DarkSora91 Livello 6

    Iscritto:
    29 Apr 2017
    Messaggi:
    131
    Like ricevuti:
    6
    scusate quindi prima di mettere questa versione devo eliminare sx autoloader? non è compatibile?
     
    #7
  8. Preacher

    Preacher Livello 4

    Iscritto:
    21 Mar 2018
    Messaggi:
    62
    Like ricevuti:
    11
    Grazie per il suggerimento, ho cancellato sx autoloader ma nulla, continua a non funzionare :cry:
    Ho provato anche a ritornare al 2.9.2 ma nulla, solito errore 2168-0002.

    Come posso risolvere? devo per forza formattare la SD? l'ho sempre avuta exFat e passare a FAT32 mi scoccia non poco..
     
    #8
    Ultima modifica: 9 Dic 2019
  9. mimmoole

    mimmoole Livello 21

    Iscritto:
    2 Lug 2018
    Messaggi:
    1.157
    Like ricevuti:
    250
    si, non è compatibile.

    si deve essere corrotto qualche file
     
    #9
  10. ulaula

    ulaula Livello 13

    Iscritto:
    5 Gen 2016
    Messaggi:
    480
    Like ricevuti:
    213
    Si, metti l'ultimo boot.dat e poi aggiorni con Coix. L'ultima volta, c'era una incompatibilità con Choix, adesso risolta, prenditi l'ultima versione di Coix. E' sopratutto USA EMUNAND, cosi se ti scappa fuori qualche casino, sei sempre con il sedere parato.
     
    #10
  11. dvicin

    dvicin Livello 2

    Iscritto:
    12 Mag 2017
    Messaggi:
    31
    Like ricevuti:
    1
    0.10.0 :nomouth::pensive::persevere:

    non uscirà mai la versione 1 definitiva promessa già mille mila anni fa :tearsofjoy:
     
    #11
  12. Maver

    Maver Livello 1

    Iscritto:
    3 Dic 2019
    Messaggi:
    13
    Like ricevuti:
    2
    ma quindi partendo da una switch compleamente originale con firmware 9.1 , posso configurare una emummc 9.1 con questa versione di SX OS 2.9.3?
     
    #12
  13. oscarvise

    oscarvise Livello 1

    Iscritto:
    10 Dic 2019
    Messaggi:
    2
    Like ricevuti:
    0
    Buonasera a tutti!
    Sono nuovo del forum e poco pratico, pur avendo una switch con sx pro. Ho installato la nuova versione 2.9.3, ma la mia switch è ancora alla versione 6.0.1 e non posso giocare a giochi come luigi's mansion o CTR per citarne alcuni. Cortesemente, c'è qualcuno che saprebbe indirizzarmi alle giuste guide per risolvere il problema? Credo debba essere aggiornata al nuovo fw 9.1, ma non so proprio come fare. Grazie in anticipo per l'aiuto e la pazienza a chi vorrà darmi una mano!
     
    #13
  14. banana jo

    banana jo Livello 7

    Iscritto:
    1 Dic 2015
    Messaggi:
    157
    Like ricevuti:
    24
    Ti conviene con sx creare l'emunand sulla sd, l'importante è che sia abbastanza capiente.
    Fatto questo scarichi l'ultimo Firmware e aggiorni tramite ChoiDujourNX solo l'emunand e lasci la nand originale a 6.0.1Trovi tutto nella sezione guide
     
    #14
  15. oscarvise

    oscarvise Livello 1

    Iscritto:
    10 Dic 2019
    Messaggi:
    2
    Like ricevuti:
    0
    Ti ringrazio moltissimo per la dritta, mi tuffo nelle guide per cercare quella giusta. Grazie!
     
    #15
Sto caricando...

Condividi questa Pagina